English
Indlu ye-aluminium eyenziwe nge-die cast ye-microwave evalelwe ngaphandle Umfanekiso oPhambili
  • Indlu ye-aluminium eyenziwe nge-die cast eyenzelwe i-microwave enclosure yangaphandle

Indlu ye-aluminium eyenziwe nge-die cast eyenzelwe i-microwave enclosure yangaphandle

Inkcazo emfutshane:

Icandelo lokuphosa i-aluminium yoxinzelelo oluphezulu– Indlu yokuphosa iidayimani ze-aluminium

Ishishini:5G Telecommunication – Iiyunithi zesikhululo esisezantsi/izinto ze-ODU/iimveliso ze-microwave zangaphandle

Impahla engekasilwa:I-aluminium alloy EN AC-44300

Ubunzima obuqhelekileyo:0.5-8.0kg

Ukwambathisa ngomgubo:i-conversion coating kunye ne-white powder coating

Iziphene ezincinci zokugquma

Izixhobo ezisetyenziselwa izixhobo zonxibelelwano zangaphandle


I-imeyile I-Whatsapp

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iinkcukacha zeCandelo

Iinkonzo zokuphosa i-aluminium ezenziwe ngokwezifiso:

Izixhobo zokuphosa iidayi ezenziwe ngokwezifiso/idayi yokuphosa iidayi/Imveliso ephantsi nephezulu

Ukusika

Ukususa iimbumbulu

Ukususa amafutha

Ukwaleka kokuguqulwa

Ukwambathisa ngomgubo

Ukuthepha kunye nokulungisa i-CNC

Isixhobo esijikelezileyo

Uhlolo olupheleleyo

Indibano

Iingenelo zeDie Cast Housing kunye neCover yeHeatsinks

IiDie Cast Heat Sinks ziveliswa zikwimo ephantse ibe yi-net, azifuni kuhlanganiswa okanye kusetyenzwa ngakumbi, kwaye zinokuhlukahluka ngobunzima. IiDie cast heat sinks zithandwa kakhulu kwiimarike ze-LED kunye ne-5G ngenxa yemilo yazo eyahlukileyo kunye neemfuno zobunzima kunye neemfuno zemveliso ephezulu.

1. Velisa iimilo ezintsonkothileyo ze-3D ezingenakwenzeka xa kukhutshelwa ngaphandle okanye kusenziwa nge-forging

2. Isinki yobushushu, isakhelo, indlu, indawo ebiyelweyo kunye nezinto zokubopha zinokudityaniswa kwi-casting enye

3. Imingxunya ingafakwa kwi-die casting

4. Izinga eliphezulu lemveliso kunye neendleko eziphantsi

5. Ukunyamezelana okuqinileyo

6. Uzinzo ngokwemilinganiselo

7. Akufuneki ukuba kwenziwe umatshini wesibini

Zibonelele ngendawo ethe tyaba kakhulu (elungele ukudibana phakathi kwesinki yobushushu kunye nomthombo)

Amanqanaba okumelana nokugqwala ukusuka kokulungileyo ukuya kokuphezulu.

Imibuzo ebuzwa rhoqo malunga neNkqubo yokuphosa iDie

1. Ungasinceda na ukuyila okanye ukuphucula uyilo lwemveliso yam?

Sineqela leenjineli ezinobuchule ukunceda abathengi bethu ukuba benze imveliso yabo okanye baphucule uyilo lwabo. Sidinga unxibelelwano olwaneleyo ngaphambi kokuba siyile ukuze siqonde injongo yakho.

2.Ungayifumana njani ikowuteshini?

Nceda usithumelele imizobo ye-3D kwi-IGS, DWG, STEP file, njl. kunye nemizobo ye-2D ukuze ufumane ukunyamezelana. Iqela lethu liza kujonga zonke iimfuno zakho zekowuteshini, kwaye liza kubonelela kwiintsuku ezi-1-2.

3. Ngaba ungayenza indibano kunye nephakheji eyenziwe ngokwezifiso?

--Ewe, sinomgca wokudibanisa, ngoko ke ungagqiba umgca wokuvelisa imveliso yakho njengenyathelo lokugqibela kumzi-mveliso wethu.

4. Ngaba unika iisampulu zasimahla ngaphambi kokuba uvelise? Kwaye zingaphi?

Sinikezela ngeesampuli ze-T1 zasimahla, 1-5pcs, ukuba abathengi bafuna iisampulu ezingaphezulu, siya kuhlawulisa ezinye iisampulu.

5. Uza kuzithumela nini iisampulu ze-T1?

Kuza kuthatha iintsuku ezingama-35-60 zomsebenzi kwi-die casting mold, emva koko siza kukuthumelela isampuli ye-T1 ukuze uyivume. Kunye neentsuku ezili-15-30 zomsebenzi zemveliso enkulu.

6. Ungathumela njani?

--Iisampulu zasimahla kunye namacandelo amancinci evolumu zihlala zithunyelwa yiFEDEX, UPS, DHL njl.

--Imveliso yomthamo omkhulu idla ngokuthunyelwa ngomoya okanye ngolwandle.

 

Isigqubuthelo sokuphosa i-aluminium die se-ODU enclosure
Isiseko kunye nesigqubuthelo sokuphosa i-die
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale